![]() I don't know what else can be done to fix this problem. I blew the socket and CPU but they are clean and no paste or fluff. I tried to flash the BIOS 7C02v39, but the effect is the same. The Bios battery was removed, the CMOS was short-circuited, the CPU_PWR1 output voltage was checked. You say a red led illuminated on the bottom right corner of the motherboard 20) CPU/VGA/DRAM/BOOT (Status LEDs) The status LEDs show whether the CPU, graphics card, memory, and operating system are working properly after system power-on. The motherboard illumination is briefly white and then red. After starting, for a fraction of a second, the three debug LEDs light up, apart from the CPU, and after a while they turn off and only the CPU LED lights up (as shown in the picture). The fan is spinning, the lighting of the components and the motherboard works, the processor heats up. The attempts were made with the frame and graphics mounted, and without them. Superceding the A7V266 model, this new Socket A motherboard. When I try to start the computer with only the processor, graphic card and display inserted, nothing appears on the monitor (connected to the graphics card via HDMI). Non-obtrusive, the built-in antenna designed to be sturdy and integrated with an LED light. Everything with the bios update went as it should. After starting the flashing, the flashBios led blinked for a few minutes, the motherboard backlight turned white, and the CPU debug LED was on all the time. I downloaded the file, changed the name to msi.rom and formatted the pendrive to fat32. ![]() First, I updated the BIOS to 7C02v3A2 (Beta version). Yesterday I was assembling a computer from the above-mentioned parts.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |